Product Details

Description

1,620 Wh
DL+ 135Ah Battery

Inverter + Solar
Complete Off-Grid

11 Years
Battery Warranty

Complete Off-Grid Capable

  • Solar panels charge via MPPT

  • Run AC appliances via pure sine wave

  • Zero maintenance — set and forget

  • Monitor via Bluetooth app

Expandable to Full Off-Grid

Add more DL+ batteries in parallel for increased capacity. The MPPT 100/30 handles up to 440W of solar, and the MultiPlus supports parallel stacking for larger systems. Start with this bundle and grow as your needs evolve.

What’s Included
  • Dakota Lithium DL+ 12V 135Ah
    1,620Wh capacity. 1000 CCA dual-purpose — starts engines AND runs deep cycle loads. Built-in BMS, IP65 rated.
    Dimensions: 13.0 x 6.8 x 8.7 in | Weight: 31 lbs

  • Victron MultiPlus Inverter/Charger
    Pure sine wave inverter + battery charger in one unit. Built-in transfer switch for seamless grid/generator switchover.
    Output: 120V AC | Continuous: 2,000W

  • Victron SmartSolar MPPT 100/30
    Maximum power point tracking solar charge controller. Bluetooth monitoring. Supports up to 440W of solar panels at 100V input. LiFePO4 charge profile built-in.
    Max PV: 100V / 440W | Charge: 30A | Bluetooth: Yes

Technical Specifications

Warranty

Warranty Details

Our 11-year manufacturer warranty provides long-term coverage and added peace of mind with your purchase. It reflects our confidence in the quality, durability, and reliable performance of our products. For complete coverage details, please refer to the applicable warranty terms and conditions.

Frequently Asked Questions

How many batteries do I need for off-grid living?

For 5 kWh of daily use, four 12V 100Ah batteries will do the job. Always plan with buffer for cloudy days.

Why are LiFePO4 batteries better than lead-acid for off-grid?

Higher efficiency, zero maintenance, much greater usable capacity, and a longer lifespan. Lithium is more cost-effective and far more reliable.

Can I use these batteries with solar panels and an inverter?

Yes. As long as your MPPT controller supports LiFePO4 mode. The included Victron SmartSolar MPPT and MultiPlus are pre-matched.

How much maintenance do they need?

Almost none. No topping off, no equalizing. Just keep the terminals clean and tight.